principal_desk

Prof. SWAMI NAIDU GURUGUBELLI

M.Tech (IITM); Ph.D; FIE; MIIM; MISTE; MIIME; MISSS; MMRSI

PROFESSOR & PRINCIPAL

JNTUK University College of Engineering

Message

JNTUK University College of Engineering, Vizianagaram is laureled as one of the best Engineering Colleges in the state of Andhra Pradesh. Established in 2007 and its commitment to excellence is not restricted to the high calibre of its faculty but ensures that the students admitted are exposed to strong graduate employability skills in addition to conceptual skills in Engineering and technology. In recent times, the institution is entering into collaborations with technology giants to share the expertize and find solutions to technological problems. In the coming years, the institution aims to be counted among the best institutions in India. The institution will continue to build its strength by developing world class teaching programmes at postgraduate and undergraduate levels in addition to pursuing research in cutting edge technologies. Further, we are conscious of our social responsibility and will continue to carry out activities with direct social impact, such as school and undergraduate teachers training, development and dissemination of sustainable technologies, and research with direct relevance to society such as climate change, healthcare, water resources management, and renewable energy. 

Profile

Recognition & Awards
  • Awards/Fellowships/Prizes:
    1. Andhra Pradesh Scientist Award - 2020 from the Government of Andhra Pradesh.
    2. Top 30 iconic principal award received on 8th April 2021 for excellence and leadership in education from GOLDEN AIM Awards,
    3. State award for Best Teacher on 7th September 2016 from the Government of Andhra Pradesh
    4. Best Teacher award on 4th September 2015 from Confederation of Education Excellence, New Delhi
    5. University Best Teacher award on 14th November 2013 from the Vice-chancellor of JNTU Kakinada, during University formation day celebrations.
    6. Research Excellency award from Indo-Global foundation, an international organization supported by the Government of Andhra Pradesh
    7. Chaired a session in the International conference on applied mechanics, materials and manufacturing (ICAMMM-2012), 19-21 Feb’ 2012, Kualalampur, Malaysia.
    8. Chaired a special session in IEEE approved International conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) – 2016, Chennai, Tamilnadu, during 3-5, March 2016.
    9. Telugu Vignana Parithoshakam, Government of Andhra Pradesh (1988-1991)
  • Professional Recognition:
  1. Editorial Board Correspondent, IIM Metal News, 2015-16
  2. Vice-Chairman, Indian Institute of Metals, Visakhapatnam Chapter (2013 – 2018)
  3. EC Member, Metallurgical and Materials Division, Institution of Engineers, Visakhapatnam chapter (2013-2015)
  4. Member of the Editorial Review board of the ‘International Journal of surface engineering and Interdisciplinary Materials Science, Inderscience Publishers.
  5. Reviewer for the International Journal of Materials engineering Innovation, Inderscience Publishers.
  6. Reviewer for the International Journal of Materials and structural integrity, Inderscience Publishers.
  7. Editorial Board Member, Advances in Materials Science and Mechanical Engineering Research (AMSMER), International Research Publication house
  8. Editorial Board Member, International Journal of Nano Science and Nanotechnology (IJNN), International Research Publication house
  9. Editorial Board Member, International Journal of Manufacturing and Mechanical Engineering (IJMME), International Research Publication house
Professional (Research/Teaching) Experience

Teaching

  • Present position: PRINCIPAL, JNTUK University College of Engineering, Vizianagaram (06-12-2019 to till date) &
  • Head, Department of Metallurgical Engineering (16-02-2016 to till date) 
    Designation Nature of appointment Department Date of Actual Joining Pay Scale
    From To
    Professor Regular Metallurgical Engineering 29-01-13 Till date Rs. 37400-67000+AGP Rs. 10,000
    Associate Professor Regular Metallurgical Engineering 16-11-06 28-01-13 Rs. 37400-67000+AGP Rs. 9000
    Lecturer
    (Sr. Scale)
    Regular Metallurgical Engineering 20-01-06 15-11-06 Rs 10000-325- 15200
    Lecturer Regular Metallurgical Engineering 20-01-01 19-01-06 Rs 8000-275-13500

Academics

  • Member, Board of Studies, Department of Metallurgical Engineering, JNTU Kakinada.
  • Member, Board of Studies, Department of Metallurgical Engineering, AU College of Engineering, Visakhapatnam.
  • Paper setter to JNTU Kakinada, JNTU Hyderabad , JNTU Ananthapur and GITAM University.
  • Examiner for B.Tech and M.Tech  projects, JNTU Kakinada.
  • Adjudicator for Ph.D thesis evaluation.
Research
  • Research Interests

Metals and alloys, Deformation behavior, severe plastic deformation, metal forming, composite materials, nano materials and characterization.

  •  Summary of Research Output:
  • THESIS GUIDANCE:

                         Ph.D = 06 (awarded) and 06 (in progress)

                        M.Tech = 28 (awarded), 12(in progress)

                      B.Tech = 250

  •  PUBLICATION:

International Journals =43

                 International Conference = 13

                 National Conference=02

  • PATENT: = 1 (filed)
Name of the applicant
Title of the invention
Application No.
Publication date
Gurugubelli Swami Naidu
Synthesis of a new class insulators and dielectrics from industrial solid waste - a novel method
6450/CHE/2015 A
08/01/2016
  • SPONSORED PROJECTS (as PI):
Sl. No.
Title of the project
Funding agency
Amount sanctioned
Period
Status
1
Synthesis and characterization of nano redmud particle reinforced aluminium matrix composites
UGC
Rs 13.902 Lac
2013-16
Completed
2
 A novel ECAR technique to produce AA5083 aluminum alloy with high deformation homogeneity and improved mechanical properties for naval applications
   NRB
Rs 33.628 Lac
2019-21
On going
Visits abroad

International conference on applied mechanics, materials and manufacturing (ICAMMM-2012), 19-21 Feb’ 2012, Kuala Lumpur, Malaysia.

Administration
  • Administrative responsibilities:
  1. Principal, JNTUK University College of Engineering, Vizianagaram. (06-12-2019 – Till date)
  2. Member, Standing Committee of Academic Senate, JNTU Kakinada (06-12-2019 – Till date)
  3. Member, University Building Committee, JNTUK (06-12-2019 – Till date)
  4. Vice Principal (Administration) - (27-02-2016 to 15-11-2018)
  5. Head, Department of Metallurgical Engineering, JNTUK University College of Engineering, Vizianagaram. (2016 – Till date)
  6. Member, College Academic Council, University College of Engineering, Vizianagaram, JNTUK (highest body of the College)
  7. Chairman, Board of Studies, Department of Metallurgical Engineering, JNTU Kakinada (2016 - till date)
  8. Head, Department of Mechanical Engineering, University College of Engineering, Vizianagaram, JNTUK (2010-2012)
  9. Member, Board of Studies, Department of Metallurgical Engineering, JNTU Kakinada (2012 - 2015)
  10. Member, Research Review Committee, Department of Metallurgical Engineering, JNTU Kakinada (2016 – till date)
  11. Member, Ph.D admission committee, Department of Metallurgical Engineering, JNTUK, Kakinada (2016 –till date)
  12. Officer–in-charge of examinations, JNTUK University college of Engineering, Vizianagaram, JNTUK (2010-2012)
  13. Coordinator, Nodal Centre, JNTUK, University College of Engineering, Vizianagaram (2009-2011)
  14. Co-ordinator, TEQIP, JNTUH, University College of Engineering, Hyderabad
  15. Coordinator, Ed-CET Counseling help line centre, Vizianagaram.
  16. Associate Professor, Department of Metallurgical engineering, JNTU Hyderabad ( 2006 – 2007)
  17. Associate Professor in Metallurgical Engineering, JNTU College of Engineering, Vizianagaram (2007 – 2012)
  18. Professor in Metallurgical Engineering ( 2012 – till date)
  19. Member of EAMCET Confidential team ( 2010 and 2011)
  20. Chairman, Purchase Committee, JNTUK University College of Engineering, Vizianagaram.
  21. Vice-President, Sports Committee, JNTUK University College of Engineering, Vizianagaram.(2016 – 2018)
  22. Vice-President, Alumni Association, JNTUK University College of Engineering, Vizianagaram.(2016 – 2018)
  • Professional/Administrative Service to other Institutions:
  1. Member, Fact  Finding Committees (in respect of extension of affiliation for the colleges affiliated to JNTUK, Kakinada)
  2. Member, Governing bodies of different colleges affiliated to JNTUK
  3. Member, Board of Studies, Department of Metallurgical Engineering, Andhra University, Visakhapatnam, Andhra Pradesh. (2014-17 and 2017-20)
  4. Member, Board of Studies, Department of Metallurgy and Materials technology, Yogi Vemana College of Engineering, Yogi Vemana University, Proddutur, kadapa (2019- till date)
  5. Data Auditor, TEQIP (world Bank project) Phase-II, for JNTUA, Pulivendula and KU, Kothagudem. (2014 – 2017)
  6. Paper setter to JNTU Kakinada, JNTU Hyderabad , JNTU Ananthapur, AU and GITAM University
  7. Examiner for B.Tech and M.Tech projects, JNTU Kakinada and AU Visakhapatnam
  8. Adjudicator and examiner for Ph.D thesis evaluation
  9. Member, AICTE Expert Verification Committee
  10. Member, AICTE-AQIS Evaluation committee
Education
Degree/Examination
    Institution
   Branch/

Specialization

     Performance
Doctor of Philosophy

(Ph.D)

(2008-2011)

J.N.T.U. Kakinada

Andhra Pradesh, INDIA

Metallurgical Engineering
--
Master of Technology

(M.Tech.)

(1998-2000)

I.I.T.Chennai

Tamilnadu

INDIA

Metal Forming
8.49 CGPA
Bachelor of Engineering

(B.E.)

(1994-1998)

J.N.T.U. Hyderabad

Andhra Pradesh

INDIA

Metallurgical Engineering
70.04%

First class with Distinction

Higher Secondary

(Intermediate)

(1991-1993)

S.R.J. College

Garividi,

Vizianagaram-Dist

Andhra Pradesh

INDIA

Science
63.1%

First Division

Secondary Examination

(Class - X)

(1990-1991)

A. P. Residential School

S.M.Puram

Srikakulam-Dist

Andhra Pradesh

INDIA

General
86.3%

Ranked 3rd in the district and received Telugu Vignana Parithoshakam

Professional Memberships
  1. Member, ASM International - 06127119
  2. Member, Minerals, Metals & Materials Society, Pittsburgh, USA, 550223
  3. Fellow Member, Institution of Engineers, F-120136-7
  4. Life Member, Indian Institute of Metals, 46459
  5. Life Member, Indian Society for Technical Education, LM-80984
  6. Life Member, Indian Institute of Mineral Engineering, Membership number is LM-1174
  7. Life Member, Institute of Smart Structures and Systems, LM-675
  8. Life Member, Materials Research Society of India, LMB2621
  9. Life Member, Indian Society for Training and Development, G-1231/2020
Workshops/Conferences Organized
  1. Chairman and Organizing Secretary for the International Conference on “Advanced Materials and Manufacturing Processes”, organized in association with Indian Institute of Metals, Vizag chapter, at the Department of Metallurgical Engineering, JNTUK University College of engineering, Vizianagaram, during 30th and 31st of March 2018.
  2. Chairman and Coordinator for the one day workshop on “Advances in composites and ferro alloy technology”, organized in association with Indian Institute of Metals, Vizag chapter, at the Department of Metallurgical Engineering, JNTUK University College of engineering, Vizianagaram, during 22nd August 2017.
  3. Chairman and Coordinator for the two day National workshop on “ Fatigue, Fracture and Creep of Materials” organized in association with Indian Institute of Metals, Vizag chapter, at the Department of Metallurgical Engineering, JNTUK University College of engineering, Vizianagaram, during 16th and 17th of September 2016
  4. Chairman and organizing secretary for the two day National level student technical symposium titled ‘EISEN-2015’ organized in association with Indian Institute of Metals, Vizag chapter, at the Department of Metallurgical Engineering, JNTUK University College of engineering, Vizianagaram, during 1st and 2nd of March 2016
  5. Chairman and organizing secretary for the two day National level student technical symposium titled ‘EISEN-2015’ organized in association with Indian Institute of Metals, Vizag chapter, at the Department of Metallurgical Engineering, JNTUK University College of engineering, Vizianagaram, during 3rd and 4th of March 2015
  6. Convener for Twenty eighth national convention of “Metallurgical and Materials Engineers”, organized at JNTUK, UCE Vizianagaram in association with Institution of Engineers (India), Visakhapatnam local centre, during 23rd and 24th January 2015
  7. Chairman and organizing secretary for the one day national workshop on “Solid waste management in ferrous and non-ferrous industries” organized in association with Indian Institute of Metals, Vizag chapter, at JNTUK University College of engineering, Vizianagaram, during 6th December 2014.
  8. Chairman and Coordinator for the National level student technical symposium titled ‘EISEN-2014’ organized in association with Indian Institute of Metals, Vizag chapter, at the Department of Metallurgical Engineering, JNTUK University College of engineering, Vizianagaram, during 12th and 13th of March 2014
  9. Coordinator for two day national workshop on “Advances in Materials and Processing Technology (AIM&PT)” organized in association with Institution of engineers, at JNTUK University college of engineering, Vizianagaram,  during 8th and 9th of March 2014
  10. Coordinator for the National level student technical symposium titled ‘MECHANO’ organized during 28th and 29th of February 2012, in the Department of Mechanical Engineering, JNTUK University College of engineering, Vizianagaram.
  11. Coordinator for the National level student technical symposium titled ‘MECHANO’ organized during 18th and 19th of March 2011, in the Department of Mechanical Engineering, JNTUK University College of engineering, Vizianagaram.
  12. Coordinator for two day national workshop on “Advanced materials and processing” Organized at JNTUK University college of engineering, Vizianagaram, during 22nd and 23rd Feb 2010.
Workshops/ Short term courses attended
  1. One day workshop on “Leadership and communication skills”, organized by JNTUK, Kakinada, on 5th December 2015.
  2. NRC-M workshop on “Polymers-Properties, characterization and applications” organized at UGC Networking Resource Centre for Materials, Department of Materials Engineering, Indian Institute of Science, Bangalore, during 1-4 July, 2014.
  3. Workshop on “Turnitin-an anti plagiarism software” conducted at R&D centre, JNTU Kakinada, on 24th January, 2014.
  4. Workshop on “Training resource persons on Outcome based accreditation – Phase-II” conducted by NBA nodal centre at JNTUK University college of engineering, Vizianagaram, during 26-28 September, 2013.
  5. One day NRB Research Dissemination workshop on “Titanium matrix composites”, conducted by Department of metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai during 30th August 2013.
  6. Two day ‘Orientation Programme for faculty’, organized by JNTUK in association with Indo US Collaboration for Engineering Education (IUCEE) during 16-17 July’2013 at University College of Engineering, JNTUK, Vizianagaram.
  7. Faculty development programme on “Soft skills for effective teaching” at JNTUK University college of Engineering, Vizianagaram, during 13-15 June, 2013.
  8. One day Workshop for “Training resource persons on outcome based accreditation – Phase-I”, conducted by NBA nodal centre, JNTUK on 29th April, 2013.
  9. Two day workshop on “Resigning of Engineering Curriculum in the context of outcome based learning”, Organized by NTUK during 24-25 February, 2013.
  10. National workshop on Quality Research and Young Scientist Sensitization, JNTUK, Kakinada, 23rd Oct’2010
  11. Pre-conference workshop on Challenges in micro and nano manufacturing: Indian perspective in the global scenario, AU, Visakhapatnam, 11-12 Dec’2010
  12. National seminar on Micro Electro Mechanical Systems (MEMS), Department of Instrumentation Engineering, AU, Visakhapatnam, 24-25 Sept’2010
  13. Workshop on Fatigue, fracture and Creep of materials and components, Department of Mechanical Engineering, AU, Visakhapatnam, 23-25 Mar’2009
  14. National workshop on composite materials, Department of Metallurgical Engineering, AU, Visakhapatnam, 27-28 Feb’2007
  15. DST sponsored Short term course on Entrepreneurship development programme organized by National institute of small industry extension training, Hyderabad, 24th May – 3rd June 2006.
  16. Short term course on Web Design, Quality improvement programme conducted by NITTT&R, Chennai, 1-5 Nov’2004.
Publications

International journals

  1. Shankar Rao and S. N. Gurugubelli, “A case study on accretion formation in rotary kiln of DRI process”, transactions of Indian institute of Metals, Springer publishers, Nov 2020.
  2. Ananda Babu Varadala, Swami Naidu Gurugubelli and Sateesh Bandaru, “An effective and economical method to improve structural homogeneity and mechanical properties of Al-Mg alloy processed by ECAE”, Advances in Applied Mechanical Engineering, Springer Nature Singapore Pte Ltd., 2020, pp 1053-1060.
  3. Srinivasulu Arnuri and Swami Naidu Gurugubelli, “NDT evaluation of age hardening kinetics of RT and cry - ECAPed Aluminum 6063 alloy from attenuation coefficient and longitudinal velocity measurements obtained by ultrasonic testing”, Materials today proceedings, Elsevier Publications, July 2020.
  4. Srinivasulu Arnuri and Swami Naidu Gurugubelli, “Toughness behaviour of cryo-ECAPed aluminium 6063 by Charpy impact test”, i-manager’s Journal on Material Science, Vol.8, No.4, Jan-March 2021, pp. 19-18.
  5. Ananda Babu Varadala, Swami Naidu Gurugubelli and Sateesh Bandaru, “Severe plastic               deformation of AA 5083 and copper bimetallic metal” SN Appleid Sciences a springer nature journal, Springer publishers, Volume 2, Issue 9, 1562 (2020).
  6. Anitha Santhoshi Madugula, Murali Krishna Baratam and Swami Nadiu Gurugubelli, “Electric discharge machining of AA2024 with specific wt% of red mud hybrid composites” Materials today proceedings, Elsevier Publications, June 2020.
  7. Brahmananda Reddy Sathi, Swami Naidu Gurugubelli and Hari Babu, “TG and DSC Analyses of Equi-Channel Angular Processed Red Mud Particle Reinforced 5083 Aluminum Alloy Matrix Composites Synthesized by Stir Casting”, Trans Indian Inst Met, Springer Publishers, ISSN 0972-2815, (2020) 73(6):1655–1659.
  8. Ch Durga Venkata Prasad, J Arout Chelvane and G Swami Naidu, “Effect of rapid thermal annealing on the structure, microstructure and magnetic properties of Fe thin films”, Phys. Scr. 94 (2019), 125803 (8pp).
  9. Srinivas, I. Srikanth, G. Rama Rao and G. Swami Naidu, Effect of Volume Fraction of Reinforcement Layers on the Mechanical Properties of S-glass-Carbon-Epoxy Hybrid Composites”, Materials today proceedings, Elsevier Publishers, 18(2019), pp. 4580-4588
  10. Ananda Babu. V, Swami Naidu Gurugubelli and Sateesh Bandaru, “Enhancement of structural and mechanical behavior of Al-Mg alloy processed by ECAE”, Materials today proceedings, Elsevier Publishers, 18(2019), pp. 2147-2151
  11. Thadivaka Ramakrishna, Silaparasetti Srinivasa Rao and Gurugubelli Swami Naidu, “Strength and hardness of post- weld heat-treated thick section 7075 Al alloy friction stir welds”, Materials Testing, May, Vol. 61, No. 5: Pages 411-416
  12. Ramakrishna, S. Srinivasa Rao and G. Swami Naidu, “Effects of Post-weld Heat Treatment on Microstructure and Mechanical Behavior of Friction Stir Welded Thick          Section Al–Zn–Mg–Cu Alloy”, Lecture notes in mechanical Engineering book series,          2019, pp 31-40
  13. Anitha Santhoshi Madugula, B. Murali Krishna and Swaminaidu, “Experimental Investigations on Wear Behavior of AA20204-Flyash- Nanostructured Redmud Hybrid Composites Synthesized by Stircasting”, International Journal of Surface         Engineering and Interdisciplinary Material Science, Vol 6, Issue 2, 2018, pp 23-35.
  14. Gampala Satyanarayana, Gurugubelli Swami Naidu, N. Hari Babu, “Artificial neural network and regression modeling to study the effect of reinforcement and      deformation on volumetric wear of red mud nano particle reinforced aluminium          matrix composites synthesized by stir casting”, Boletín de la sociedad española de         cerámica y vidrio 57, 2018, pp. 91–100, ELSEVIER Publishers.
  15. Srinivasa Prasad Katrenipadu and Swami Naidu Gurugubelli, “Regression Modeling and Experimental Investigations on Ageing Behavior of Nano-Fly Ash Reinforced Al- 10wt%Mg Alloy Matrix Composites”, International Journal of Surface Engineering and Interdisciplinary Materials Science, Volume 6, Issue 2, 2018, pp. 36-49.
  16. Ananda Babu. V, Swami Naidu Gurugubelli and Sateesh Bandaru, “Equal channel angular extrusion of semicircular AA5083 with covered copper casing”, Journal of              Emerging Materials Research, ISSN: 2046-0147, ICE Publishing, Vol.7, Issue.3,   2018, pp.1-14.
  17. Ananda Babu. V, Swami Naidu. G and Sateesh. B, “Equal Channel Angular Extrusion of AA 5083 alloy with copper shielding”, Journal of Advanced Materials Research, Trans Tech Publications, ISSN: 1662-8985, Vol. 1148, pp 82-87
  18. Siva Karuna1, S. Venu Gopala Swamy and G. Swami Naidu, “Effect of Blast Furnace Slag and Red Mud Reinforcements on the Mechanical Properties of AA2024 Hybrid Composites” Journal of Advanced Materials Research, Trans Tech Publications, ISSN: 1662-8985, Vol. 1148, pp 29-36.
  19. K Santarao, C. L. V. R. S. V Prasad, G Swami Naidu, Influence of dominant variables and their optimization for nanopowder blended EDM process, Journal of Engineering Technology, AmericanSociety for Engineering Education (ASEE), ISSN: 0747-9964, 2017, Vol 6, pp. 164-169
  20. K Santarao, C L V R S V Prasad, G Swami Naidu, Employing SiC nano-powder dielectric to enhance surface characteristics in electrical discharge machining of AISI D3 steel, International Journal of Engineering and Technology Innovation, Taiwan Association of Engineering and Technology Innovation, ISSN: 2223-5329, Scopus & Emerging Sources Citation Index, Impact factor 0.059 (accepted)
  21. K Santarao, C L V R S V Prasad, G Swami Naidu, Parametric optimization of nano powder blended electrical spark machining process on AISI D3 DIE steel employing grey relational analysis, Journal of Materials and Environmental Sciences, University of Mohammed Premier Oujda Publishers, 2028-2508, Scopus, Impact factor 0.837 (accepted)
  22. Santarao, C. L. V. R. S. V. Prasad, Swami Naidu Gurugubelli, “Influence Of Nano And Micro Powders  In Electric Discharge Machining: a review”, Journal of Manufacturing Technology Research, Nova Science Publishers, ISSN: 1943-8095, Vol 8, Number 1-2, pp. 11-20,  2016, Scopus, Impact factor 0.315.
  23. Santarao, C. L. V. R. S. V. Prasad, Swami Naidu Gurugubelli, “Experimental investigation on influence of SiC nano powder blended dielectric in electric spark machining”, International Journal of Modern Manufacturing Technolofies”, ISSN:2067 – 3604, Vol X, No. 1, pp. 84-91
  24. K Santarao, C L V R S V Prasad, G Swami Naidu, “Experimental Investigation To Study The Viscosity And Dispersion Of Conductive And Non-Conductive Nanopowders’Blended Dielectrics”, Advances In Science And Technology-Research Journal, Lublin Univ Technology publishers, Poland, ISSN: 2299-8624, Emerging Sources Citation Index , 2017, Vol 11., pp 154-160
  25. Alekhya Medepalli, Swami Naidu Gurugubelli, “Friction stir welding of dissimilar Al-alloys at different welding parameters: Experimental testing and finite element analysis”, International Journal of Modern Engineering and Research Technology, ISSN: 2348-8565, Vol 5, Issue 4, 2018, pp. 231-240
  26. Ambedkar, B.R., Naidu, G.S., Lalitha, V.S.S., Krishna, D.M., “Microstructural and mechanical Properties of aluminium and magnesium bimetal extruded composite:, Journal of Production Engineering, 2016, Vol. 19(2), pp. 49-52
  27. Satyanarayana; G. Swami Naidu; N. Hari Babu, The effect of deformation on wear behaviour of Al-5% red mud particle reinforced nano composites synthesized by stir casting, Int. J. of Materials Engineering Innovation, Inderscience Publishers, 2016 Vol.7, No.2, pp.115 - 129
  28. Swami Naidu Gurugubelli, “Experimental Investigations on optical and mechanical properties of al-8Mg alloy processed by equal channel angular extrusion”, International journal of materials engineering and innovation, Inderscience Publishers, Vol. 7, No.1, 2016, pp. 26-32.
  29. Gurugubelli S N, AVSSKS Gupta, NRMR Bhargava, ‘Deformational inhomogeneity in Al-2 wt pct Mg and Al-8 wt pct Mg alloys- Microhardness study’, International journal of materials engineering and innovation, Inderscience Publishers, 3, No. 1, 2012,  pp. 32-49.
  30. Swami Naidu, AVSSKS Gupta, NRMR Bhargava, “Ageing and corrosion studies of cast Al-8wt%Mg alloys”, International journal of material science, Vol. 6; 2011, pp. 197-201.
  31. Swami Naidu, AVSSKS Gupta, NRMR Bhargava, ‘Deformational inhomogeneity in Al-4Mg alloys – Microhardness study’, International journal of Manufacturing technology research, Vol. 3, Issue 3-4, 2011.
  32. Swami Naidu, AVSSKS Gupta, NRMR Bhargava, ‘Deformational inhomogeneity in Al-8Mg alloys- Microhardness study’, International Journal of Materials and Structural Integrity.
  33. Swami Naidu Gurugubelli, “Studies on Recovery and Recrystallization Kinetics of 18-8 Stainless Steels using Differential Scanning Calorimetry”, International journal of Advanced Materials Science, Vol. 3, No. 2, 2012, pp. 97-101
  34. Swami Naidu, “Experimental investigations on corrosion behavior of cast Al-Mg alloys”, International Journal of Engineering, Science and Metallurgy, Vol. 2, No. 2, 2012, pp. 630-633.
  35. Swami Naidu Gurugubelli, “Experimental investigations on bulge profile of Al-Mg alloys during cold upsetting”, International Journal of Science and Advanced Technology, Vol. 2, No. 5, 2012, pp. 184-186
  36. Swami Naidu Gurugubelli, “Experimental investigations on structure and mechanical properties of semi solid casting of gray cast iron”, International Journal of Advanced Scientific and Technical Research, Issue 2, Vol. 3, 2012.
  37. Rajesh D., Swami Naidu Gurugubelli, “CFD analysis of two-phase flow to predict pressure drop for low mass fluxes of refrigerants”, International journal of Advanced Technology and Engineering Research, Issue 4, Vol. 2, 2012, pp. 198-201.
  38. Rajesh Egala and Swami Naidu Gurugubelli, “Unsteady multi-phase analysis of free-surface flow in washing machines using computational fluid dynamics”, International Journal of Mechanical Engineering Research, Vol. 2, N0. 2, 2012, pp. 209-215.
  39. Swami Naidu Gurugubelli, “Experimental Investigations on tensile properties of Al-Mg alloys at warm temperatures”, International Journal of Engineering, Science and metallurgy, vol. 2, No. 3, 2012.
  40. Gurugubelli S N, AVSSKS Gupta, NRMR Bhargava, “The effect of magnesium concentration and Deformation on the ageing behavior of Al-Mg alloys”, International journal of materials engineering and innovation, 2013 Vol.4, No.1, pp.57 – 64
  41. Satyanarayana G, Narayana Rao K, Swami Naidu G and Bhargava N R M R, “Nano structured Red mud – Synthesis and XRD studies”, International Journal of Mechanical Engineering and Material Sciences, Serials Publications, ISSN 0974-584X, Vol. 7, No. 1, pp.63-65
  42. Srinivas Prasad and G. Swami Naidu, “Nano fly ash – Synthesis and characterization”, International Journal of Mechanical Engineering and Material Sciences, Serials Publications, 2014, Vol. 7, No. 1, pp.67-70
  43. Kameswari Bolem1, Anandababu Varadala2, Swami Naidu G, “Equal Channel Angular Pressing of Aluminium Alloy 5083 using different die geometries”, International Research Journal of Engineering and Technology, Vol. 4, Issue 5, 2017, pp. 3357-3362

International Conferences:

  1. Ramakrishna, S. Srinivasa Rao and G. Swami Naidu, “investigations on post-   weld heat treated friction stir welds of high strength aluminum alloy”, sermat- 2019, ssn college of engineering, chennai, 14-15 march 2019
  2. Ramakrishna, S. Srinivasa Rao and G. Swami Naidu, “Effects of post weld heat treatment on microstructure and mechanical behavior of friction stir welded            thick section Al–zn–Mg–Cu alloy, FLAME-2018, Amity University, Noida, Uttar           Pradesh, 03-05 October 2018.
  3. Ramakrishna, S. Srinivasa Rao, G. Swami Naidu, S.R. Koteswara Rao and T. Srinivasa Rao, “Effect of Post Weld Heat Treatments on Mechanical Behavior of       Friction Stir Welded Thick Section 7075 Aluminum Alloy”, Young Professionals           International Conference 2017, Chennai trade centre, Chennai, 07-09 December 2017
  4. Ananda Babu Varadala, Sai Mani P, Swami Naidu G and Sateesh B, “Evaluation of microstructure, mechanical properties and wear behavior of aluminum alloy 5083 processed by Equal Channel Angular Extrusion (ECAE) with half covered copper casing”, International Symposium on Lightweighting for Defence, Aerospace and Transportation” NMD-ATM-2017R-00475,Goa, 11-14 November 2017.
  5. Jayaprasad Vanam, S Kamaluddin, N Mohan Rao and G Swami Naidu, “Finite Element Simulation of Aluminium Alloy Subjected to Equal Channel Angular Pressing (ECAP)”, International Symposium on Lightweighting for Defence, Aerospace and Transportation” NMD-ATM-2017R-00294, Goa, 11-14 November 2017.
  6. Swami Naidu Gurugubelli, Satyanarayana Gampala, Sai Mani Paidi and Hari Babu N, “Optimization and Artificial neural network modelling for the prediction of effect of red mud concentration and cold work on volumetric wear of nano red mud particle reinforced aluminium matrix composites”, NMD-ATM-2017R-00454, Goa, 11-14 November 2017.
  7. Hari Babu N and Swami Naidu Gurugubelli, “FEA of Al-SiC composite in Engine valve guides”, International conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) – 2016, Chennai, Tamilnadu, during 3-5, March 2016.
  8. Srinivasa Prasad. K and Swami Naidu. G, “Wear Behaviour of Nano Fly Ash reinforced Aluminium-10 Magnesium Alloy Matrix Composites”, International conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) – 2016, Chennai, Tamilnadu, during 3-5, March 2016.
  9. Raja Kandivalasa, Avinash Ben, Swami Naidu G and Raghu ram K S, “Low Power Consumption Mech-Automatic Flush - A mechatronic based water saver”, International conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) – 2016, Chennai, Tamilnadu, during 3-5, March 2016.
  10. Satyanarayana G., Swami Naidu G., Hari Babu N., “Deformation behaviour of al-10 wt% red mud particle reinforced nano Composites – wear studies”, International conference on Material Processing Technology MPT-2016, Organized at Pune, during 5-7, January 2016, pp. 13-20
  11. Sai Mani and G. Swami Naidu, “Evaluation of Erosion Characteristics of Glass- Epoxy composites Filled with red mud particles Using Taguchi Technique”,    International conference “NMD-ATM-2014” organized at College of Engineering, Pune during 12-15, November 2014.
  12. Swami Naidu, ‘The effect of Aluminium composition on the wear behavior of AlxCoCrCuFeNi high-entropy alloys’, NMD-2013, IIT Varanasi.
  13. G Swami Naidu, ‘The effect of ageing on impact toughness and microstructure of 2024 Al-Cu-Mg alloy’, International conference on applied mechanics, materials and manufacturing (ICAMMM-2012), Kualalampur, Malaysia, 19-21 Feb’ 2012.
  14. G Swami Naidu, AVSSKS Gupta, NRMR Bhargava, ‘Deformational inhomogeneity in Al-8Mg alloys- Microhardness study’, International Conference on Advances in Materials and Materials Processing (ICAMMP-2011), IIT Kharagpur, 9-10 Dec’2011.
  15. K, Gowri Sankar. J, Gurugubelli. S. N, Satiah. N, Ramesh. M, ‘Expression and purification of ScFv protein in E. Coli Rosetta 2 (DE3)’, International symposium on desalination, drinking water quality in rural areas, drought mitigation and water reuse InDACON-2011, JNTUK, Vizianagaram, 24-25 Mar’2011.
  16. G Swami Naidu, AVSSKS Gupta, NRMR Bhargava, ‘Microhardness studies of Al-4wt pct Mg alloys to analyze the deformation behavior’, 3rd international and 24th AIMTDR conference, AU, Visakhapatnam, 13-15 Dec’2010.

National Conferences:

      1. Satyanarayana G, Narayana Rao K, Swami Naidu G and Bhargava N R M R, “Nano structured Red mud – Synthesis and XRD studies”, AICTE Sponsored National Conference on Recent Trends in Mechanical Engineering (NCRTME-2014), 21-22 FEB’2014.
      2. Srinivas Prasad and G. Swami Naidu, “Nano fly ash – Synthesis and characterization”, AICTE Sponsored National Conference on Recent Trends in Mechanical Engineering (NCRTME-2014), 21-22 FEB’2014.
Invited talks in Workshops and Conferences
  1. Delivered invited talk on “Advances in Metal Matrix Composites”, in the International conference on Emerging trends in materials and manufacturing engineering (IMME-2017), held during 10-12 March, 2017, organized by the Department of Metallurgical and Materials Engineering, NIT, Trichy.
  2. Delivered invited talk on “Wear Characterization of Metal Matrix Composites” in the one week faculty development programme on Advances in manufacturing of Composites held during 27th November – 2nd December 2017 in the department of Mechanical Engineering, Sasi Institute of Technology and Engineering, Tadepalligudem.
  3. Resource person in AICTE funded two week faculty development programme on contemporary advances in Materials and Manufacturing Engineering (CAMME-2017), held during 30th October -10th November, 2017 in the Department of Mechanical Engineering, JNTUK College of Engineering, Kakinada.
  4. Delivered an Invited Lecture on “Composite materials an over view” during the Faculty Development programme on “Research potential and scope in Mechanical Engineering”, conducted under TEQIP Phase-II, at AITAM, Tekkali, during 27th September -2nd October, 2016
  5. Delivered an Invited Lecture on “Fracture Mechanics” during the Faculty Development programme on Research potential and scope in Mechanical Engineering, conducted under TEQIP Phase-II, at AITAM, Tekkali, during 27th September -2nd October, 2016
  6. Delivered an Invited Lecture on “Advances in Metal Matrix Composites” in the national conference on Advances in Composite Materials (NCACM-2015) conducted during 21-22 February 2015 at GIET, Gunupur, Orissa.
  7. Delivered an Invited Lecture on “Applications of textile Composites” during the National Workshop on Advanced Materials and Materials Processing conducted during 21st and 22nd February 2010 at JNTUK University College of Engineering, Vizianagaram.
Extra-curricular activities

1.   President, Teachers Association, University College of Engineering, Vizianagaram, JNTUK ( 2013-2014)

2.   Vice-President, Alumni Association, University College of Engineering, Vizianagaram, JNTUK ( 2016-2017)

3.   President, Teachers Association, University College of Engineering, Vizianagaram, JNTUK ( 2016- 2017)

Books Edited/ Authored
Sl. No.
Title of the Bok/Book Chapter
Publishers
Edited/ Authored
1
Advanced Materials and Manufacturing Processes
Trans Tech Publications
Edited
 
2
 
Deformation behaviour of Magnesium alloys (Engineering Trends in Mechanical, Computing and Electrical Sciences)
 
Anvi Books and Publishers
 
Authored Book Chapter
3
Recent Developments in computing, Electronics and Mechanical Sciences
Anvi Books and Publishers
Chief editor
Details of Courses Taught
Sl.No
Subject
Level
1
Material Science
PhD., Credit Course
2
Design with advanced Materials
1st year M.Tech (ME)
3
Mechanical Metallurgy (Theory and lab)
3rd year B.Tech (Met)
4
Thermodynamics and Kinetics (Theory)
2nd year B.Tech (Met)
5
Metallurgical Thermodynamics (Theory)
2nd year B.Tech (Met)
6
Heat Treatment Technology (Theory and lab)
3rd year B.Tech (Met)
7
Mechanical Working of Metals (Theory and lab)
4th year B.Tech (Met)
8
Metal forming and press tools
4th year B.Tech (Met)
8
Metallurgy and Material Science
2nd year B.Tech (ME)
9
Instrumentation
3rd year B.Tech (ME)
10
Industrial Management
3rd year B.Tech (ME)
11
Environmental studies
2nd year B.Tech (ME)
Personal Information

1.     1. Name, designation and address for communication:

Prof. G. SWAMI NAIDU

                                                         M.Tech (IITM); Ph.D; FIE; MIIM; MISTE; MIIME; MISSS;MMRSI

Chairman, Board of Studies 

Head of Metallurgical Engineering &

PRINCIPAL 

JNTUK University College of Engineering

 Vizianagaram – 535 003, AP, INDIA

 E-Mail: gsnaidujntuk@gmail.com and viceprincipal.admin@jntukucev.ac.in

 Cell: +91 9963001596

                        University Homepage: www.jntuk.edu.in

                        College Homepage     : www.jntukucev.ac.in

 

2.     2. Residential address:

H. No. # 39-22-54/7/2,  Kalinga Nagar,  Madhavadhara, Visakhapatnam 530007, AP, INDIA

 

           3. Date and Place of Birth:                        July 20, 1975; SRIKAKULAM

4.     4. Religion:                                                     Hinduism BC-A

5.   5. Nationality:                                                Indian (Passport No.: G 3237096)

Born in Srikakulam, India